What fun we had
making cards via Zoom last week! It’s so
great to be able to see and play with everyone and be SAFE!!!! These are the cards we made.
* Sahara Sand card stock: 8-1/2” x 5-1/2”, scored at 4-1/4”; 5-14” x 4” (2 pcs.)
* White card stock: 5” x 3-3/4” (inside)
* Boho Indigo Designer Series Paper (“DSP”) **: scrap for 1-1/2” circle
* Shimmery White card stock: 3” x 1/2"
* Free as a Bird stamp set
* Misty Moonlight Classic Stampin’ Pad
* Seabed 3D Embossing Folder
* Stitched Shapes Dies
* 1-1/2” Circle Punch
* 2” Circle Punch
* Banners Pick a Punch***
* Linen Thread (about 6”)
* Adhesives: Double-sided tape or tape runner; Glue Dots; Foam Tape or Stampin’ Dimensionals
*** Aug.-Dec. 2020 Mini Catalog (pg. 65)
1. Score 8-1/2” x 5-1/2” Sahara Sand card stock at 4-1/4”; fold away from score line to create card base.
2. Use 2” Circle Punch to cut circle about 1-1/4” from top edge and 3/8” from left edge of one of the 5-1/4” x 4” pieces of Sahara Sand card stock. DO NOT DISCARD CIRCLE.
3. Use embossing folder to add texture to this piece. Center and adhere to card front.
4. Use 1-7/8” Stitched Circle die to cut circle out of the 2” circle from Step 2.
5. Use 1-1/2” Circle Punch to cut circle from DSP. Adhere to Stitched Circle. Use Foam Tape or Stampin’ Dimensionals to adhere circle to card front in space where 2” Circle was cut out of embossed card stock.
6. Use Banners Pick a Punch to trim one end of Shimmery White card stock. Stamp sentiment on banner, leaving enough space at untrimmed edge for bow. Use a Glue Dot to adhere flat end of banner to circle and a Stampin’ Dimensional to adhere trimmed end to embossed card stock.
7. Make a bow with Linen Thread and adhere to banner with a Glue Dot behind knot.
8.
Inside. Adhere second piece of 5-1/4” x 4”
Sahara Sand card stock to inside of card.
9. Stamp sentiment on White card stock and adhere to inside of card over Sahara Sand card stock.
A simple,
elegant thank you note!
Card 2: “Make
a Wish”
Pieces Parts
Paper
* Melon Mambo card stock: 8-1/2” x 5-1/2”; scraps for words, balloons and strings
* Mango Melody card stock: 5-1/2” x 4-7/16”; scraps for balloon
* White card stock: 5-1/4” x 4” (inside)
* Artistry Blooms Designer Series Paper (“DSP”): 5-1/4” x 1-3/16”; 5-1/2” x 1-3/8”
* Gold Glitter paper: scraps for balloons
Other Stuff
* Happy Dies
* Happy Birthday and Make a Wish Dies**
* Champagne Rhinestone Basic Jewels
* Adhesives: Double-sided tape or tape runner; Stampin’ Dimensionals; Liquid Glue
** Happy
Birthday and Make a Wish Dies from my stash
Assembly
1. Score 8-1/2” x 5-1/2” Melon Mambo card stock at 4-1/4”; fold away from score line to create card base.
2. Use Happy Die to cut HAPPY lining up bottom of die at 1-11/16” from bottom of card front. NOTE: You don’t need to use this exact measurement, but if you change the position you will need to adjust size of DSP strips.
4. On front, adhere DSP 1-3/16” wide DSP strip to top of card; adhere 1-3/8” wide strip to bottom of card.
5. Use Happy dies to cut balloons from Gold Glitter paper and string and bows from Melon Mambo card stock. Adhere small balloon with Liquid Glue or Glue Dots. Adhere large balloon with Stampin’ Dimensionals. Use Liquid Glue to adhere strings and bows as shown.
6. Cut birthday from Melon Mambo paper and adhere with Liquid Glue as shown. Dot the “i” with a Rhinestone.
9. Stamp sentiment on White card stock and adhere to inside of card over Sahara Sand card stock.
* * * * *
* Melon Mambo card stock: 8-1/2” x 5-1/2”; scraps for words, balloons and strings
* Mango Melody card stock: 5-1/2” x 4-7/16”; scraps for balloon
* White card stock: 5-1/4” x 4” (inside)
* Artistry Blooms Designer Series Paper (“DSP”): 5-1/4” x 1-3/16”; 5-1/2” x 1-3/8”
* Gold Glitter paper: scraps for balloons
* Happy Dies
* Happy Birthday and Make a Wish Dies**
* Champagne Rhinestone Basic Jewels
* Adhesives: Double-sided tape or tape runner; Stampin’ Dimensionals; Liquid Glue
1. Score 8-1/2” x 5-1/2” Melon Mambo card stock at 4-1/4”; fold away from score line to create card base.
2. Use Happy Die to cut HAPPY lining up bottom of die at 1-11/16” from bottom of card front. NOTE: You don’t need to use this exact measurement, but if you change the position you will need to adjust size of DSP strips.
4. On front, adhere DSP 1-3/16” wide DSP strip to top of card; adhere 1-3/8” wide strip to bottom of card.
5. Use Happy dies to cut balloons from Gold Glitter paper and string and bows from Melon Mambo card stock. Adhere small balloon with Liquid Glue or Glue Dots. Adhere large balloon with Stampin’ Dimensionals. Use Liquid Glue to adhere strings and bows as shown.
6. Cut birthday from Melon Mambo paper and adhere with Liquid Glue as shown. Dot the “i” with a Rhinestone.
7.
Inside.
Adhere White card stock to inside of card. Cut balloons and words from Melon Mambo and
Mango Melody card stock. Use Liquid Glue
to adhere as shown.
A sparkly,
happy birthday to you!
Card 3: “Season
of Thanks Reverse Easel”
Pieces Parts
Paper
* Soft Suede card stock: 11” x 4-1/4”; scraps for bouquet elements
* Night of Navy card stock: 5-1/4” x 4”; 4” x 2-1/2” (3 pcs.); 2-1/2” x 1-3/16”
* Feels Like Frost 6” x 6” Designer Series Paper (“DSP”): 5” x 3-3/4”; 3-3/4” x 2-1/4” (2 pcs.)***
* White card stock: 2-3/8” x 1-1/16” for Stitched Rectangle (sentiment)
* Vellum card stock: scraps for bouquet elements
* Copper Foil: scrap for bouquet element
Other Stuff
* Gather Together stamp set (sentiment)
* Sending Sunshine (tiny dots on sentiment)
* Copper Delicata Metallic Ink **
* Night of Navy Stampin’ Pad
* Stitched Rectangle Dies (sentiment)
* All Around Wreath Dies (copper element)
* Poinsettia Dies (soft suede elements)
* Sunflowers Dies (vellum elements)
* Linen Thread
* Copper Metallic Thread **
* Adhesives: Double-sided tape or tape runner; Liquid Glue; Glue Dots; Foam Tape or Stampin’ Dimensionals
** Copper
Delicata Metallic Ink and Copper Metallic Thread are retired Stampin’ Up!
products.
*** When cutting DSP, try to cut one 3-3/4” x 2-1/2” piece the same design as top portion of 5-1/4” x 4” DSP. This way when you close the card, it appears to be the same picture. The second piece of 3-3/4” x 2-1/2” DSP should be cut sideways from the first piece, since it will be perpendicular to the first piece.
Assembly
1. Score 11” x 4-1/4” Soft Suede card stock at 2-3/4” and 5-1/2”. Fold to the back on 2-3/4” score line; fold to the front on 5-1/2” score line, creating a “Z” shape card.
* * * * *
* Soft Suede card stock: 11” x 4-1/4”; scraps for bouquet elements
* Night of Navy card stock: 5-1/4” x 4”; 4” x 2-1/2” (3 pcs.); 2-1/2” x 1-3/16”
* Feels Like Frost 6” x 6” Designer Series Paper (“DSP”): 5” x 3-3/4”; 3-3/4” x 2-1/4” (2 pcs.)***
* White card stock: 2-3/8” x 1-1/16” for Stitched Rectangle (sentiment)
* Vellum card stock: scraps for bouquet elements
* Copper Foil: scrap for bouquet element
* Gather Together stamp set (sentiment)
* Sending Sunshine (tiny dots on sentiment)
* Copper Delicata Metallic Ink **
* Night of Navy Stampin’ Pad
* Stitched Rectangle Dies (sentiment)
* All Around Wreath Dies (copper element)
* Poinsettia Dies (soft suede elements)
* Sunflowers Dies (vellum elements)
* Linen Thread
* Copper Metallic Thread **
* Adhesives: Double-sided tape or tape runner; Liquid Glue; Glue Dots; Foam Tape or Stampin’ Dimensionals
*** When cutting DSP, try to cut one 3-3/4” x 2-1/2” piece the same design as top portion of 5-1/4” x 4” DSP. This way when you close the card, it appears to be the same picture. The second piece of 3-3/4” x 2-1/2” DSP should be cut sideways from the first piece, since it will be perpendicular to the first piece.
1. Score 11” x 4-1/4” Soft Suede card stock at 2-3/4” and 5-1/2”. Fold to the back on 2-3/4” score line; fold to the front on 5-1/2” score line, creating a “Z” shape card.
2.
On inside (5-1/2” x 4”) panel, adhere
Night of Navy card stock; adhere DSP over card stock.
3.
Cut white card stock with 2-3/8” x 1-1/16” Stitched
Rectangle. Stamp sentiment with Night of
Navy ink; stamp dots with Copper Ink.
Adhere to 2-1/5” x 1-3/16” Night of Navy card stock. Fold top panels half-way down and use as a
guide to adhere sentiment to DSP with Foam Tape or Stampin’ Dimensionals.
4. Adhere 4” x 2-1/2” Night of Navy card stock to top panel; adhere 3-3/4” x 2-1/4” DSP over card stock. This piece should match top part of inside DSP. See *** above.
5. Adhere 4” x 2-1/2” Night of Navy card stock to center panel.
4. Adhere 4” x 2-1/2” Night of Navy card stock to top panel; adhere 3-3/4” x 2-1/4” DSP over card stock. This piece should match top part of inside DSP. See *** above.
5. Adhere 4” x 2-1/2” Night of Navy card stock to center panel.
6.
Adhere second piece of DSP to last piece of 4” x
2-1/2” piece of Night of Navy card stock.
This piece should be cut perpendicular to the first piece in Step
4. See *** above. Apply Foam Tape or Stampin’ Dimensionals to back
(top half only) of this piece. Fold top
portion half-way down and carefully line up to cover sentiment. Remove backing from foam and adhere to top
panel.
7. Use Liquid Glue to adhere bouquet pieces to the piece created in Step 6. For the sample, I applied a thin line of liquid glue to just the stem of the vellum pieces and adhere them first. Second, I applied a few tiny drops of liquid glue to the twigs and adhered them over the vellum pieces. Third, I applied dots of Liquid Glue to the berries on the copper element and adhered it on top of the other pieces.
8. Hold the Linen Thread and Copper Metallic Thread together and make a loopy bow. Adhere over the bouquet with a Glue Dot behind the knot.
7. Use Liquid Glue to adhere bouquet pieces to the piece created in Step 6. For the sample, I applied a thin line of liquid glue to just the stem of the vellum pieces and adhere them first. Second, I applied a few tiny drops of liquid glue to the twigs and adhered them over the vellum pieces. Third, I applied dots of Liquid Glue to the berries on the copper element and adhered it on top of the other pieces.
8. Hold the Linen Thread and Copper Metallic Thread together and make a loopy bow. Adhere over the bouquet with a Glue Dot behind the knot.
No comments:
Post a Comment